#2 Crushed Stone in Massachusetts
Keep #2 Crushed Stone out of the finished surface on a Massachusetts drive. Its open grading fits culvert, drainage, and heavy base work.
- Size: About 1-1/2 inches to 2-1/2 inches
- Grading: #2, washed with no fines
- Type: Large angular crushed stone
- Supplied as: #2 or the closest local equivalent; we confirm the exact material before delivery
From $458 for 1 ton, delivery included (larger loads cost significantly less per ton)
Free delivery included
Free delivery anywhere in Massachusetts
Pick a delivery date
Weekday delivery, earliest Oct 30
Get a Free Quote
Fill out the form and our sales team will get back to you within the hour.
Everything You Need to Know About #2 Crushed Stone
Size and Grading
- Size
- About 1-1/2 inches to 2-1/2 inches
- Grading
- #2, washed with no fines
- Type
- Large angular crushed stone
- Supplied as
- #2 or the closest local equivalent; we confirm the exact material before delivery
Before building a drive or drainage line on Massachusetts glacial till, account for ledge that can limit excavation. #2 Crushed Stone provides large angular rock for work that needs an open stone layer rather than a closed surface. It is washed and free of fines, so smaller material does not fill the spaces between the pieces. That makes it suited to culvert and ditch areas where drainage is part of the job.
Deep frost can make standing water around a base more troublesome over time. Use #2 Crushed Stone below the material intended for the finished driving surface, not as the surface itself. The open lower layer is also useful for heavy base work where the site allows it, including areas near exposed ledge where drainage planning needs to fit the available excavation.
Quickly Calculate How Much You Need
Material: #2 Crushed Stone
How to Measure
Measure the length and width of your project area in feet
Decide on depth in inches (2" for landscaping, 4" for driveways)
Enter the values above and we'll calculate the tonnage you need
Need help figuring out the right amount? We can help!
Call or text us at (508) 625-9266 and we'll help you calculate the right quantity for your project.
Not sure how much you need? The Stone Calculator has depth guides, coverage charts and worked examples for this material.
Common Uses
Construction Entrances
Set large angular stone at the site access to help pull mud from truck tires before they reach the road.
Culvert and Ditch Protection
Use heavy stone at culvert ends and drainage channels where runoff gathers and can move material.
Base for Heavy Traffic
Place it as the initial layer below farm roads, equipment areas, or weak ground, then finish with smaller stone.
Drainage Layers
The open spaces between the pieces let substantial water flow pass through and clear the work area.
Why Choose #2 Crushed Stone
Holds in Place
The weight and size of the stone help it stay put under tire traffic and limit rutting.
Moves Water Quickly
With no fines, washed stone leaves open voids that allow water to drain.
Supports Weak Soil
Angular, oversized rock distributes weight over wet or unstable subgrade.
Low Maintenance
After placement, maintenance is usually limited to adding more material from time to time.
