3/8 Inch Crushed Stone for Pathways in Revere, MA

Massachusetts Rock Supply handles gravel and aggregate delivery in Revere, MA for two kinds of buyers: contractors loading out a job and homeowners fixing one driveway or path. Both usually start with processed gravel, the base material this market specifies as M1.03.1. Revere sits on stony glacial till over dense lower ground, so water moves slowly and base depth matters more than it does inland.

Materials for Revere Projects

Paths and walkways are where most Revere orders get interesting. A path fails fast when the surface layer is too coarse or the bedding layer is missing, so the fines and screenings matter as much as the stone underneath.

Start with Processed Gravel. It is the standard Massachusetts base, made of crushed stone and fines that lock together under compaction. On a path, compact a solid layer of it and you have something that will not rut in a thaw.

Over that base, Stone Dust is the New England default. It packs to a hard, smooth surface that takes foot traffic and sheds water instead of turning to mud. Use it under flagstone and pavers too.

3/8" Crushed Stone is the step up when a path needs to drain rather than seal. It is washed, so it stays loose and free-draining, and it works well over a compacted base on garden paths and around stepping stones.

Finish edges and low spots with Pea Stone. It is rounded, comfortable underfoot, and useful around play areas and drip edges. For the base under a paver path, Crusher Run does the compacting work where a stone and fines blend is wanted.

Ground and Conditions in Revere

The failure mode you see here is a thin base. Revere sits on stony glacial till and drumlin ground over dense, slowly draining lower till, with marine clay and filled land in the low areas near the harbor. Water has nowhere to go quickly.

So a path built on a thin skim of base looks fine in July and turns to soup after a March thaw. Build it right: a compacted processed gravel base, a free-draining surface or bedding layer above it, and a fall away from the house.

Frost depth runs 48 inches by state code, and repeated freeze-thaw in late winter heaves gravel drives and pavement. Winters are a little milder right on the coast than in the inland suburbs, but the thaw damage is the same.

Timing matters as much as material. Base, driveway and paver work runs spring through late fall. Frozen ground stops compaction in winter, and late-winter thaws bring the worst soft-ground and pothole conditions. Coastal nor'easters and high tides push surge into low-lying filled land, which is why drainage layers and riprap armoring come up often on the east side of town.

Delivery to Revere and the Surrounding Area

Order online and pick your quantity by the ton or the cubic yard. The two are not the same thing, and mixing them up is the most common mistake on a bulk order. A ton measures weight; a yard measures volume. Stone and gravel vary in weight per yard, so the material you choose changes the number.

To estimate, work out length times width times depth in feet, divide by 27 for cubic yards, then convert to tons for the material. The site calculator does this for you once you enter your dimensions and depth.

Delivery is bulk, dumped at the closest safe spot to the work. A path order usually wants to land near the path, not at the end of the drive, so tell us where the pile should go. Revere sits in Suffolk County, and we also deliver to Boston, Chelsea, Dorchester, Allston and Brighton.

Get Your Path Materials Figured Out

Run your dimensions through the calculator first, then order the processed gravel, stone dust and 3/8 inch crushed stone your path needs, all in one delivery to Revere. If the numbers look close, order a little extra for compaction loss and edge fill. Place your order online when you are ready.